Titanium Blind Flange

Feature: Blind Flange(BL) Blind Flange is the middle of the flange without hole, for sealing the pipe plug.There are many types of sealing surface, including plane, convex surface, concave and convex surface,tenon groove surface and ring connecting s...

Titanium Flange Tube Sheet

Feature: Low Density High Strength Applications: The tube sheet is mainly used for chemical containers, such as heat exchangers, pressure vessels, boilers, condensers, central air conditioners, evaporators, etc., to support the fixed column tubes, an...

Titanium Lap Joint Flange

Feature: Lap Joint Flange The lap joint flange is actually identical to the sliding flange. Normally, lap joint flanges and lap stubs are together will be the system. Applications: Our flange has served the widely used in Petroleum Industry, Chemical...

Titanium Plate Flange

Feature: Plate Flange The Plate Flange is suitable for connecting titanium pipes with nominal pressure not exceeding 2.5mpa. The sealing surface of the plate flange can be made into smooth type, concave and convex type, tenon groove type. The smoothe...

Titanium Reducing Flange

Feature: Reducing Flange There is a certain difference between the inside diameter of reducing flange and that of standard flange. In engineering, when the standard flange cannot be matched with pipe fittings and pipes, the variable diameter flange i...

Titanium Slip-On Flange

Feature: Slip-On Flange The sliding flange has a lower hinge as the pipe enters the single flange before welding.It is welded internally and externally to provide sufficient strength to prevent leakage.The sliding flanges are all bore to match the sl...

Titanium Threaded Flange

Feature: Threaded Flange The threaded flange is connected with a thread. However, the center of the product has a thread size corresponding to the pipe. Its main advantage is that it can be assembled without welding. Thread flange nominal size: DN8 ~...

Titanium Socket Weld Flange

Feature: The Socket Welding Flange The socket welding flange is a similar sliding flange unless it has a hole and reverse hole dimensions. The counter hole matches the pipe so that the pipe is inserted into the flange similar to the sliding flange. T...

Titanium Weld Neck Flange

Feature: Weld Neck Flange (WN) Butt flange: Weld Neck Flange is usually called “high hub” flange. Its purpose is to transfer the pressure of the pipe, thereby reducing the high stress concentration in the flange base. However, the price is high, beca...